Woodsorption panels are easy to maintain. The panels can be cleaned with non-abrasive cleaners which are suitable for wood veneers.
There are two standard finishes for Woodsorption. One face pattern is made up of a series of slats and the other pattern is a series of perforated round holes. Other face patterns may be produced upon request. Each panel has a machined tongue down one long edge and a machined groove down the other long edge. Each end is square edged and unjointed.
These have longitudinal grooves, 3mm wide and machined along the length of each panel. The machined slots are in two versions: Version A has slots machined every 32mm resulting ineach slat being 29mm wide Version B slots machined every 16mm making every slat 13mm wide.
Woodsorption is an ideal sound absorbing panel with qualities which are pleasing to both the ear as well as the eye.
Woodsorption is also one of the most advanced and efficient sound absorbing products available today for reducing reverberant noise levels in many environments. Panels are normally fixed onto 50mm battens.